Skip to product information
1 of 1

GSI Creos Mr. Color 003 Red 10ml

GSI Creos Mr. Color 003 Red 10ml

SKU :

Regular price $20.00 HKD
Regular price Sale price $20.00 HKD
Sale Sold out
 More payment options

Release Date :

Anime Series :

Producer : Mr. Hobby

Age :

Length :

Width :

Height :

Material :

SOLVENT-BASED ACRYLIC PAINT

Mr.COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. Wide range of colors are available, and these are suitable for military tanks, aircrafts, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colors and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

★SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING

THINNING RATIO for Mr. COLOR

BRUSH PAINTING:
1 : 0.8~1.0
(Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING:
1: 1~2
(Mr. COLOR : Mr. COLOR THINNER)
※Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

Mr. COLOR THINNER: The most basic thinner for Mr. COLOR

Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.

Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH:
✓ Mr. COLOR
✓ Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
✓ Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
✓LASCIVUS

CANNOT BE MIXED WITH:
× AQUEOUS HOBBY COLOR
× ACRYSION, ACRYSION BASE COLORS
× CLASSY 'N DRESSY COLORS
× Mr. METAL COLOR

★AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
★Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing.
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

  • Use T114 Mr. Paint Remover to remove paint from a surface.
  • Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
  • Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
  • Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
  • Do a test paint before you apply paint on your model kit.

ATTENTION:

  • Put the lid back on after use.
  • Store in a cool and ventilated place, away from direct sunlight.
  • Use in a well ventilated area.
  • Made in Japan.
View full details

Mechanicore

1/100 ZMS-42 Firehawks

The ZMS-42 is Mechanicore's latest marvel, succeeding the acclaimed PROJ-0033 TIEF STURMER as the new flagship masterpiece. With its hawk-inspired design, this model transitions seamlessly between the "Genesic Heavy Assault" and "MS Close Combat" configurations. Decked in a vivid red with advanced lighting, it's a standout build that commands attention.

More Info

Conversion Kit

MS-07H-8 Flying Gouf

The SH STUDIO 1/100 MS-07H-8 Flying Gouf Conversion Kit transforms a1/100 MG MS-06 Zaku Ver. 2.0into the aerial Flying Gouf, featuring new thrusters, wing armor, and a modified backpack, enhancing its mobility and offering dynamic posing options for Gunpla collectors.

More Info

Kosmos

MG 1/100 Nu Gundam RGB LED Matrix

Introducing the KOSMOS MG 1/100 RX-93 Nu Gundam RGB LED Matrix, complete with a stunning lighting set for a mesmerizing display!

More Info