Mr.COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. Wide range of colors are available, and these are suitable for military tanks, aircrafts, car models, robot models, and many more.
Mr. COLOR is available in a wider range of colors and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.
★SUITABLE FOR BOTHHAND PAINTINGANDAIRBRUSHING
THINNING RATIO for Mr. COLOR
BRUSH PAINTING: 1 : 0.8~1.0 (Mr. COLOR : Mr. COLOR THINNER)
AIRBRUSHING: 1: 1~2 (Mr. COLOR : Mr. COLOR THINNER) ※Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING
Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER. Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
CHOOSE AN APPROPRIATE THINNER
Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
Mr. RAPID THINNER: Speedsup the drying speed. Recommended for matt paints and metallic paints.
MIXING
CAN BE MIXED WITH: ✓ Mr. COLOR ✓ Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX ✓ Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC ✓LASCIVUS
CANNOT BE MIXED WITH: × AQUEOUS HOBBY COLOR × ACRYSION, ACRYSION BASE COLORS × CLASSY 'N DRESSY COLORS × Mr. METAL COLOR
★AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR. ★Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.
HOW TO APPLY Mr. COLOR
Apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing. After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.
TIP!
Use T114 Mr. Paint Remover to remove paint from a surface.
Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
Do a test paint before you apply paint on your model kit.
ATTENTION:
Put the lid back on after use.
Store in a cool and ventilated place, away from direct sunlight.
Mr.COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. Wide range of colors are available, and these are suitable for military tanks, aircrafts, car models, robot models, and many more.
Mr. COLOR is available in a wider range of colors and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.
★SUITABLE FOR BOTHHAND PAINTINGANDAIRBRUSHING
THINNING RATIO for Mr. COLOR
BRUSH PAINTING: 1 : 0.8~1.0 (Mr. COLOR : Mr. COLOR THINNER)
AIRBRUSHING: 1: 1~2 (Mr. COLOR : Mr. COLOR THINNER) ※Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING
Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER. Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
CHOOSE AN APPROPRIATE THINNER
Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
Mr. RAPID THINNER: Speedsup the drying speed. Recommended for matt paints and metallic paints.
MIXING
CAN BE MIXED WITH: ✓ Mr. COLOR ✓ Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX ✓ Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC ✓LASCIVUS
CANNOT BE MIXED WITH: × AQUEOUS HOBBY COLOR × ACRYSION, ACRYSION BASE COLORS × CLASSY 'N DRESSY COLORS × Mr. METAL COLOR
★AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR. ★Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.
HOW TO APPLY Mr. COLOR
Apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing. After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.
TIP!
Use T114 Mr. Paint Remover to remove paint from a surface.
Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
Do a test paint before you apply paint on your model kit.
ATTENTION:
Put the lid back on after use.
Store in a cool and ventilated place, away from direct sunlight.
The much-awaited Perfect Grade Gundam Astray Red Frame is finally here, marking a grand return to the Perfect Grade line, which hasn't seen a new addition since the Perfect Grade Strike Gundam in 2004. This...
From the 10th anniversary video "Gundam Build Metaverse" of the "Gundam Build Series" scheduled to be released in October 2023, the Kunoichi-themed gunpla "F9 ノ1 Kai" will appear in the SD Gundam Cross Silhouette!■Two types of...
"God Burning Gundam" appears from the 10th anniversary video "Gundam Build Metaverse" of the "Gundam Build Series" scheduled to be released in October 2023!■A variety of effects are included, including a cloak effect with a...
There are video loading... This product includes body, weapon light set and specified product stand, it does not include the aerial gundam. The light set only designs and suitable for FM 1/100 Aerial Gundam. This product...
Product introduction MG 1/100 RX-78-2 Gundam Ver.3.0 is now available in a special color! ■Special marking stickers for the body, shield, etc. are included. ■ Equipped with "movable armor system". Added mobility linked with...
Shien's "Ghost", Flyingghost again -From "Mobile Suit Crossbone Gundam Ghost" comes a 1/144 scale Ghost Gundam in the HG series!The silver part of the main body adopts matte plating.Reproduce the beautiful shining silver.In addition to...