G System 1/72 RX-104FF Penelope

- The kit works against New-G Pre-Assembled Plastic Injection Internal Frame #FI-ABS-NGF1-060 ;
- The New-G pre-assembled robot frame figure is provided in a separate gift box inside ;
- The resin parts of the main body are made in multi-color resin ;
- The kit is installed with many LED ;

Specifications:

- Product codes : GS-285
- Overall height : 44.5 cm ( up to the head horn )
- Head height : 34.5 cm
- Shoulder width : 39.0 cm
- Overall depth : 28.5 cm ( base depth ) / 51.5 cm ( up to the end-tip of tail-stabliser )
- Kit weight : 3.8 kgs
- Part A - No. of W1 “Main-White” resin parts : 168 pcs.
- Part B - No. of Y3 “Orange-Yellow” resin parts : 62 pcs.
- Part C - No. of B6 “Navy-Blue” resin parts : 21 pcs.
- Part D - No. of G5 “Blue-Grey” resin parts : 41 pcs.
- Part E - No. of G2 “Medium-Grey” resin parts : 58 pcs.
- Part F - No. of R2 “Custom-Red” resin parts : 43 pcs.
- Part G - No. of G3 “Heavy-Grey” resin parts : 59 pcs.
- Part H - No. of Y3 “Orange-Yellow” in ABS : 1 pc.
- Part I - No. of G3 “Heavy-Grey” in ABS : 7 pcs.
- Part CR – No. of clear resin parts : 3 pcs.
- Part AA - Alluminium Made Mini Parts : 68 pcs.
- Part CP - Copper Rod : 3 pcs. ( Ø3mm x 55mm ; Ø2mm x 75 mm ; Ø1.5mm x 120mm )
- Part PE - Photo-Etch : 2 pcs ( 1 main design + 1 for metal thrusters )
- Part MA - Mini-Magnets : 4 pcs. ( Ø3mm x 2mm )
- Part SW - No. of screws of 2 standards: 6 pcs. ( Ø2mm x 20mm ; Ø7mm x 8mm )
- Part EP - Silver coated copper-made pins : 37 pcs.
- Part EA - Metal-Made Extendable arms : 2 pcs.
- Part CO - Copper parts : 2 pcs.
- Part MP - No. of dark-iron coated metal thrusters : 2 pcs ( Ø15mm x 12mm )
- Part HP - No. of heat pressed clear parts : 8 pcs.
- Part LD - LED system x 1 set ( composed of 7 groups )
- Part DE - No. of water slide decal : 1 pc.
- Part NG - Plastic Injection made, pre-assembled New-G Robot internal frame #FPI-ABS-NGF1-060 x 1 box
- No. of 4R photos : 3 pcs.

Product Information