The MS-18 Kampfer was a prototype mobile suit created by the Principality of Zeon in the anime series Mobile Suit Gundam 0080: War in the Pocket, designed by Yutaka Izubuchi. For the figure Zeonography, it is redesigned by Katoki Hajime. In the few remaining days and weeks before the end of the One Year War, the Principality of Zeon churned out several new prototype mobile suits. One of these new units was known only as the YMS-18 Prototype Kampfer, which Zeon engineers quickly began producing different variations and redesigns to create custom units meant to excel in specific mission roles. One of the variations created was the MS-18E Kampfer ("Kampfer" being the German word for "fighter").
The "E" in the MS-18E Kampfer's model number was an abbreviation for the German word "einhauen," which translates to "one strike." "One strike" summed up the Kampfers role in combat as a fast assault unit. It was meant to strike quickly, cause massive damage with its varied weapons loadout, and make a fast escape. The Kampfer was a very focused design, never intended to work outside of its created role. Within this role it was an exceptional unit, rivaling the Federation RX series in firepower and speed. The unit was covered with thrusters and verniers to give it high maneuverability. Conversely, the large number of thrusters resulted in a high fuel consumption rate, limiting it to only being operable for short periods of time. Its designers chose only minimal armor plating, even removing the hip mounted skirt armor found on most mobile suits entirely from the design. The choice of conventional explosives and weapon systems in favour of beam weapons was made to reduce the drain on its powerplant and resultant drop in speed. Weapons racks were designed to be ejected from the unit as they were expended, minimizing dead weight. The unit was intended to be operated by special forces, built to be easily disassembled and reassembled in blocks. This was to aid in its insertion and activation behind enemy lines.
Product Information
Length
39
Width
31
Height
09
Scale
1/100
All characters
0080 POCKET WAR
*This item requires 7–10 days to prepare before it is shipped.
The MS-18 Kampfer was a prototype mobile suit created by the Principality of Zeon in the anime series Mobile Suit Gundam 0080: War in the Pocket, designed by Yutaka Izubuchi. For the figure Zeonography, it is redesigned by Katoki Hajime. In the few remaining days and weeks before the end of the One Year War, the Principality of Zeon churned out several new prototype mobile suits. One of these new units was known only as the YMS-18 Prototype Kampfer, which Zeon engineers quickly began producing different variations and redesigns to create custom units meant to excel in specific mission roles. One of the variations created was the MS-18E Kampfer ("Kampfer" being the German word for "fighter").
The "E" in the MS-18E Kampfer's model number was an abbreviation for the German word "einhauen," which translates to "one strike." "One strike" summed up the Kampfers role in combat as a fast assault unit. It was meant to strike quickly, cause massive damage with its varied weapons loadout, and make a fast escape. The Kampfer was a very focused design, never intended to work outside of its created role. Within this role it was an exceptional unit, rivaling the Federation RX series in firepower and speed. The unit was covered with thrusters and verniers to give it high maneuverability. Conversely, the large number of thrusters resulted in a high fuel consumption rate, limiting it to only being operable for short periods of time. Its designers chose only minimal armor plating, even removing the hip mounted skirt armor found on most mobile suits entirely from the design. The choice of conventional explosives and weapon systems in favour of beam weapons was made to reduce the drain on its powerplant and resultant drop in speed. Weapons racks were designed to be ejected from the unit as they were expended, minimizing dead weight. The unit was intended to be operated by special forces, built to be easily disassembled and reassembled in blocks. This was to aid in its insertion and activation behind enemy lines.
Product Information
Length
39
Width
31
Height
09
Scale
1/100
All characters
0080 POCKET WAR
Product Recommended
The IN ERA+ 1/100 RMD Series Lizard Model Kit is a meticulously crafted model that showcases a sleek and futuristic design. Once assembled, it stands at approximately 25 cm tall and is fully articulated, allowing for dynamic posing.
Product Recommended
The SH STUDIO 1/100 MS-07H-8 Flying Gouf Conversion Kit transforms a 1/100 MG MS-06 Zaku Ver. 2.0 into the aerial Flying Gouf, featuring new thrusters, wing armor, and a modified backpack, enhancing its mobility and offering dynamic posing options for Gunpla collectors.
Product Overview This impressive weapon measures 300mm in length and features parts that can unfold. Its design has been significantly altered, and a new sub-grip allows for a variety of pose options. The set also...
Product Overview The Gundam designed for Innovade, leading to the Reborns, makes a stunning appearance in Mobile Suit Gundam 00: Revealed Chronicle! Standing at approximately 210mm, this is one of the largest figures in the...
Product Overview
These mass-produced units, alongside the GM II, represent two of the most iconic designs developed after the One Year War. Now, they're available from ver. A.N.I.M.E.!
Product Description From GRIDMAN UNIVERSE comes a rerelease of the deluxe combinable toy of Dynazenon! The pre-painted ABS complete robot stands at approximately 250 mm. The Dyna Soldier, Dyna Wing, Dyna Striker, and Dyna Diver...
Description From Gridman Universe comes a MODEROID plastic model kit of Cho Ryuoh Gattai Chojin Rogue Kaiser Gridman! This product is a set of MODEROID Dynazenon and MODEROID Gridman (Universe Fighter) & Big Goldburn. Rogue...
Description From the anime series The Big O comes a rerelease of the plastic model of the Megadeus Big O, controlled by the main character, Roger Smith! The mecha stands at an impressive 230 mm...
Description From the anime series DARLING in the FRANXX comes a rerelease of the plastic model kit of the FRANXX that Hiro and Zero Two ride, Strelitzia! The "Steel Lady" has been carefully supervised by...
Description This is an injection-plastic kit of a science fiction/anime item. Good Smile Company's compact, fully transformable and combinable "MODEROID" model kit of Getter 1 from "Getter Robo" is back! The kit is fully articulated...
【MG 1/100 Wing Gundam Zero Endless Waltz not included!!】
This conversion kit needs MG 1/100 Wing Gundam Zero Endless Waltz to complete. You can enjoy 5% off if you purchase from "Frequency Buy Together".
IntroductionThis product is a metal replacement frame made specifically for the 1/100 MG RX-93 Nu Gundam Ver Ka. It’s crafted entirely from high-strength metal alloy with a sleek black coating, giving the inner frame extra...
IntroductionThis product is a metal replacement frame made specifically for the MG 1/100 AGW-G-08 Barbatos Gundam. It’s crafted entirely from high-strength metal alloy with a sleek black coating, giving the inner frame extra durability and...
Key Features of the 1/35 Unicorn Gundam Bust This 1/35 Unicorn Gundam Bust features a striking design with built-in LED lighting that illuminates the Psycho Frame. A bold, eye-catching display piece perfect for collectors and...
HG Scopedog Series Add-On Set Now Available!(Each item sold separately) ※ The base "HG Scopedog" kit is required for use with this product (sold separately). The Journey of Revenge Comes to an End Enhance your...